BOSS Silicone Sealant

BOSS® 122 RTV silicone sealant is a one-part acetoxy cure sealant, designed for general construction sealing applications. Suitable for use on clean metal, glass, different types of wood, silicone resins, vulcanized silicone rubber, ceramic and plastic surfaces.

Features:

• Ease of use, one-part sealant, no mixing required.


• Good weather resistance – virtually unaffected by sunlight, rain, ozone, and temperature extremes.


• Long-life reliability, cured sealant stays rubbery without tearing, cracking, drying out, or becoming brittle.


• Wide temperature gunnability – can be applied in any season.

BOSS® 322 100% RTV silicone sealant is a paste-like, one-component material that cures to a tough, rubbery solid when exposed to moisture in the air. Since it will not flow under its own weight, this sealant can be applied overhead or on sidewall joints and surfaces without sagging, slumping, or running off. It will adhere to clean metal, glass, most types of wood, silicone resin, vulcanized silicone rubber, ceramic, natural and synthetic fibre, as well as painted and many plastic surfaces.

Features :

• Excellent adhesion to most common substrates.


• Good resistance to weathering, vibration, moisture, ozone, and extreme temperatures.


• May be applied in sub-zero weather without loss of extrusion or physical property characteristics.


• Non-sagging, non-slumping.

Applications :

• Adhering auto and appliance trim, including metal, fabric, and fabric-backed plastics.


• Bonding gaskets in heating and refrigeration units.


• Bonding signs and sign letters.


• Construction sealant.


• Filleting and caulking joints in sheet metal stacks, ductwork, and equipment housings.


• Formed-in-place gasket for gearboxes, compressors, and pumps.


• Glazing sealant.


• Sealing of marine cabins and windows.


• Sealing trailers and truck cabs.


• Windshield and backlight replacement.

BOSS® 388 neutral weatherproofing silicone sealant is a one-part, neutral cure, low-odour, construction-grade sealant that offers excellent adhesion, weather-resistance, and compatibility with a wide variety of materials.

Features:

• Excellent adhesion to most common building materials.


• Low-odour.


• Non-corrosive to metal.


• Weatherproof and waterproof.

Applications:

• Ideally suited for weatherproofing, waterproofing, sealing, and expansion of control joints and general-purpose glazing.


• Other bondable surfaces include ACP, anodized aluminium, cement, wood, ceramics, painted surface, and many plastics.


• Works well with glass, glazed surfaces, concrete, and galvanized steel.

BOSS® 389+ weatherproofing silicone sealant is a construction-grade sealant that provides unmatched adhesion, weather resistance and can be used on a wide variety of materials. It is a one-part, neutral cure, and low-odour sealant.

Features:

• Compatible with all structural silicone sealant.


• Good weather and temperature resistance.


• Medium modulus – with expansion/compression capability up to ± 25% of the original joint width.


• Neutral cure, with a long open time.


• Permanently elastic after curing.

Applications:

• Ideally suited for weatherproofing, waterproofing, sealing of expansion and control joints, and general-purpose glazing.


• Other bondable surfaces include anodized aluminium, concrete, cement, wood, ceramics, and painted surfaces.


• Works well with ACP, glass, glazed surfaces, and galvanized steel.

BOSS® 394 neutral non-corrosive, silicone is a one-component, adhesive/sealant, specially formulated for use in general sealing applications.

Features:

• Excellent adhesion to vinyl, wood, steel, aluminium, glass, and plastic.


• Non-corrosive, with neutral cure, low-odour, and medium modulus.


• Permanently flexible.


• Waterproof/weatherproof.

Applications:

• Other bondable surfaces include anodized aluminium, UPVC, wood, ceramics, painted surfaces, and most plastics.


• The product is ideally suited for sealing and bonding with glass, glazed surfaces, and galvanized steel.

BOSS® 395AF is a single component, neutral antifungal silicone sealant which vulcanizes on exposure to moisture in the air at room temperature, to produce a flexible elastomeric sealant. It is suitable for all common construction and glazing application. It is easy to apply and offers excellent adhesion to a variety of non-porous substrates such as glass, glazed ceramic tiles, and aluminium. It is resistant to ozone, ultra-violet radiation, and temperature extremes.

Features:

• Almost no smell.


• Colourfast and UV resistant.


• Contains fungicide.


• Excellent adhesion to vinyl, wood, steel, aluminium, glass and plastic, bathtubs, closets, washbasin, and so on.


• Non-corrosive, neutral cure, low-odour & medium modulus.


• Permanently flexible.


• Stays elastic after curing.


• Very easy to apply; flows readily from the container.


• VOC Compliant.


• Waterproof/weatherproof.

Applications:

• Ceramic applications such as joints between wall and floor tiles.


• Doors and window sealing.


• Ideal for application in all areas that are prone to mould and mildew formation.


• Sealing around shower cubicles and joints in and around sanitary fittings.


• Sealing around washbasins, bathtubs, kitchen sinks, and counters.

BOSS® 395 neutral non-corrosive, industrial silicone is a high-performance, one-component adhesive/sealant formulated for industrial and electrical applications. It remains permanently flexible and exhibits excellent adhesion to a wide variety of substrates.

Features:

• Excellent adhesion to vinyl, wood, steel, aluminum, glass, and plastic.


• Good resistance to gasoline, engine oil, gear oil, and water.


• Low-odour.


• Neutral cure.


• Non-corrosive.


• Permanently flexible.


• VOC Compliant.


• Waterproof/weatherproof.

Applications:

• Bonding appliance parts.


• Gasketing application in gearbox, engine, and other industrial applications.


• Sealing electrical equipment.

BOSS® 396 neutral silicone sealant is a high-quality, low odour, one-part neutral curing sealant that offers excellent adhesion, compatibility with a wide variety of substrates, and excellent weather durability.

Features:

• Excellent adhesion to most common building materials.


• Non-corrosive to metals.


• Permanently flexible.


• Resistant to moisture and temperature extremes.


• Weatherproof, waterproof, and UV resistant.

Applications:

• General-purpose glazing, sealing, and weatherproofing applications.


• Other sealable and bondable surfaces include concrete, cement, wood, and many plastics.


• Sealing and bonding glass, glazed surfaces, and anodized aluminium.

BOSS® Flexsil silicone sealant is a one-part, acetoxy cure, adhesive sealant that is suitable for general construction sealing and adhesive applications. This product will adhere to clean metal, glass, many types of wood, silicone resins, vulcanized silicone rubber, and ceramics.

Features:

• Ease of use, one-part sealant, no mixing required.


• Good weather resistance.


• The cured sealant also does not dry out or become brittle over time.


• The cured sealant stays rubbery without tearing or cracking.


• Wide temperature applicability.

Applications:

• All general sealing applications.


• Ideally suited for sealing, glass windows, shopfront, aluminium joints, showcases, bus-body building, and automobile manufacturing.

BOSS® GP silicone sealant is a one-part, acetoxy cure, adhesive sealant that is suitable for general sealing and bonding applications. This product will adhere to clean metal, glass, many types of wood, silicone resins, vulcanized silicone rubber, ceramics, and plastic surfaces. The product also cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

Features:

• Cured sealant stays rubbery without tearing, cracking, or drying out.


• Ease of use, one-part sealant, no mixing required.


• Excellent primer-less adhesion to most non-porous materials.


• Good weather resistance.


• Wide temperature applicability.

Applications:

• Elastic joints in cold store and container applications.


• Sealing around metal, glass, UPVC, most types of woods, and ceramics.


• Sealing glass, glass windows, shopfront, aluminium joints, showcases, bus-body building, and automobiles.


• Sealing in air-conditioning systems.

BOSS® Hi-Temp silicone sealant is a one-part, non-slumping paste that cures to a tough, rubbery solid at room temperature on exposure to water vapour in the air, and can be used for numerous sealing and bonding applications.

Features:

• Extremely durable.


• Fast curing.


• Flows readily from the container.


• Formulated to perform at extreme temperatures.

Applications:

• Oil pans.


• Oil pump flanges.


• Rear-end housings.


• Thermostat housings.


• Timing chain covers.


• Transmission pans.

BOSS® Neutral+ non-corrosive, neutral cure, silicone sealant is a one-part, low-odour, professional-grade sealant that offers excellent adhesion, weather-resistance, and compatibility with a wide variety of substrates. It can be used to meet a variety of sealing and bonding needs.

Features:

• Low-odour.
• Non-corrosive, neutral cure.
• Permanently flexible.
• VOC Compliant.
• Waterproof/weatherproof.

Applications:

• Bonding appliance parts.
• Other bondable surfaces include UPVC, wood, ceramics, painted surfaces, and most plastics.
• Sealing and bonding with glass, glazed surfaces, galvanized steel, and anodized aluminium.
• Sealing electrical equipment.